E3 and E5 series
With the E series we introduce two innovative batteries, rolling systems for mobile use.
Whether they are on a construction site, in a production hall, on a set or in emergency shelters – these energy storage units provide a fast, low-emission and continuous power supply.
In this way, diesel generators can be replaced and the flexibility of applications can be increased.
Thanks to the E series, all electrical devices and tools up to 3,000 and 5,000 watts can be easily operated.
Using an E3 or E5 is ideal, especially when power is needed at different points in the same location.
In this way, energy can be reliably supplied everywhere – even without a mains connection.
Diesel generators thus become useless and can be replaced with a significantly quieter, emission-free battery storage system.
E3 & E5 – exemple
Mobile battery storage:
− For electrical appliances and tools up to 3,000 and 5,000 watts without connection to mains power
− Ideal for power requirements at different positions on a pick-up set
− Replaces diesel generators with the quieter, emission-free battery storage units
Example applications with ARVEY E5:
− Demolition hammer (2000 W) on construction site: 3 hours continuous operation
− Large cut-off machine (3500 W) in production hall: approx. 1 hour 40 minutes continuous operation
− Lighting setup with 2 floodlights (x200 W), 2 spotlights (x300 W) on film set: 6 hours continuous operation
Hybridization diesel generator:
− With the existing diesel generator, cost savings are possible through combination with E3 or E5
− Intelligent by-pass function gives priority to generator power consumption and stores surplus energy in the battery
Uninterrupted power supply (UPS):
− For safety-critical applications, E-series solutions can be used as uninterruptible power supplies
− In case of mains failure, system control switches to battery operation within less than 8 milliseconds and guarantees power
supply
Uninterruptible power supply
In safety-critical applications, a permanent power supply for equipment is essential.
Here, the solutions in the E range can be used as an uninterruptible power supply. If an E3 or E5 is connected between the load and the mains connection (via Pass mode), the system control switches to battery, an operation that is performed in just 7 milliseconds in the event of a network failure, thus guaranteeing the delivery of uninterrupted power..
Examples of applications with an E5:
• Demolition hammer (2000 W) on site: 3 hours of continuous operation
• Large cutting grinder (3500 W) in the production hall: approx. 1 hour 40 minutes continuous operation
• Lighting configuration with 2 projectors (200 W each), 2 spotlights (300 W each) on the set: 6 hours of continuous operation
Genset hybridization
If you already have a diesel generator, it’s worth connecting it with an E3 or E5.
For example, the intelligent bypass function allows the power of the generator to be used primarily at the ideal power and the excess energy is stored in the battery.
This way, no energy is lost and costs and emissions can be saved.
E3 and E5 in few words
Mobility – The battery case is sturdy, rollable metal container
Flexible – Charged via mains, generator or photovoltaic
Powerful – between 3 and 5 kilowatts continuously, output power of 230 volts (in the short term, maximum power of 300% for starting the power bridge).
Safe and long-lasting – Advanced lithium-iron phosphate, batteries (LiFePo4) are safe
Durable – between 4.4 and 6 kilowatt-hours battery capacity
Easy to use – Plug & Play – Intuitive interface, shows the user the most important information in real-time
